Question By: Replacing glass in a commercial door is a task that requires some level of skill and experience, but with the right tools and guidance, it can be done successfully.
The following steps outline a general process for replacing glass in a commercial door:
Measure the Glass
Before you begin, you will need to measure the glass that needs to be replaced. Measure both the height and width of the glass and write down these dimensions so that you can order a replacement that fits the opening.
Remove the Old Glass
To remove the old glass, use a putty knife or similar tool to carefully remove the glazing compound from around the edge of the glass. Be sure to wear gloves and eye protection to avoid injury from broken glass. Once the compound is removed, gently push the glass out of the frame.
Clean the Frame
After the old glass has been removed, clean the frame thoroughly to ensure that the new glass will fit properly. Use a brush or vacuum to remove any debris or dust from the frame.
Install the New Glass
Apply a thin bead of glazing compound around the edge of the frame where the new glass will be placed. Gently press the new glass into the compound, making sure that it fits securely and evenly in the frame. Use glazing points or clips to hold the glass in place while the compound dries.
Finish the Job
Once the glass is securely in place, use a putty knife to apply a smooth, even layer of glazing compound around the edge of the frame to seal the glass. Let the compound dry completely, then sand and paint as needed to match the existing frame.
Visit https://bestofferglass.com/commercial-glass-replacement/ for more information.
Answer By: